Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Positioning
Positioning
Since the communication is performed with the fl ash emission of the camera, the fl ash positioning
range varies with camera.
1
1
2
Position the fl ash facing the desired direction.
•
Instead of using the stand, you can also shoot simply holding the fl ash.
x
Notes
•
The built-in fl ash can not be used as a light source in RC mode.
•
We recommend using a single group of up to three remote fl ash units.
•
Flash may not fi re due to the angle or distance between the camera and the object.
Take a test shot after positioning.
1
2
2
Attach the stand provided.
•
Slide the fl ash securely into the stand until
it clicks into place ( 1 ). Press the shoe lock
release button to remove the fl ash.
When using it for bounce, be careful not to drop
off the stand ( 2 ).
13
EN
Publicidad
Tabla de contenido
