7�3�1
Saving a JOB
7�3�2
Modifying a JOB
7�3�3
Deleting a JOB
To do so, proceed as follows:
♦ Access the JOB menu as described in 7.3
♦ Select the JOB to be deleted
♦ Select the "delete" icon and confirm choice
80/89
Press and select the memory number in which the JOB is to be
saved. In this example, no. 1
Confirm the choice that is highlighted in green.
To save the JOB in memory 1, select and confirm the icon, save,
and then confirm.
To return to the main screen, press knob B (do not release
immediately) (> 0.7 sec).
To modify or use a program, proceed as follows:
♦
Access the JOB menu as described in 7.3
♦
Select the JOB to be modified
♦
Select and confirm retrieve sector
To return to the main screen, press knob B (do not release
immediately) (> 0.7 sec).
The program is available for welding.
to modify welding parameters, proceed as described in section
5.4 and the following sections.
to save once more, proceed as described in section 7.3.1.