Safety - Ingun MA Serie Manual Del Usuario

English
The QR code at the top right on the nameplate contains the part number, the product description
and the serial number.
3)

Safety

3.1) Danger levels of warnings
Meaning of the signal words used here:
S M
IGNAL WORD
DANGER I
MMEDIATE DANGER OF DEATH OR SERIOUS INJURY
WARNING P
CAUTION P
ATTENTION P
NOTE A
3.2) Criteria relating to staff
All work on the test fixture may only be performed by specially trained staff. Pre-requisites:
 Mechanics: completed qualification in industrial mechanics
 Electrical engineering: completed qualification in electrical engineering
 For all other sectors (e.g., transport, test operation, storage and disposal): knowledge of these
operating instructions of these operating instructions
In general:
 The clothing worn by the person operating or maintaining the test fixture must not present any
hazards (no jewellery, no loose-fitting garments such as ties, scarves, etc., long hair must be
tied back).
 The persons operating or maintaining the test fixture may not be under the influence of
medication, drugs or alcohol.
3.3) Liability for misuse
INGUN assumes no liability for damages caused by non-compliance with the operating instruc-
tions, or lack of testing to ensure the technically perfect and safe state of the test fixture.
3.4) Safety instructions
WARNING L
ETHAL ELECTRIC SHOCK
Deadly electrical voltage at the test probes and interface components for > 25 VAC voltage
and > 60 VDC voltage!
Apply voltage only if all of the following conditions are met:
The voltage specified on the rating plate for the test fixture and the replacement kit must

©
INGUN: Subject to technical changes without notice. E&OE.
Text fixture rating plate
/ C
EANING ONSEQUENCES IF DISREGARDED
OSSIBLE RISK OF DEATH OR SERIOUS INJURY
OSSIBLE RISK OF MODERATE OR MINOR INJURY
OSSIBLE DAMAGE TO PROPERTY
DDITIONAL INFORMATION AND USEFUL TIPS
!
22