JVC LT-32HG82WU Manual Del Usuario página 183

Basic Feature
Channel management (ATV / DTV Mode)
Press the
to set the channel that you are currently watching
as set the Favorite1,Favorite2,Favorite3,Favorite
4 programmes.
FAV/FAV+/FAV- button to set the
Favorite List.
Common Interface (DTV mode)
To view the module information.
1. Press the MENU button to display the main
menu. Press the buttons to select Channel
in the main menu, then press the
button.
2. Press the buttons to select Common
Interface and then press the ENTER button.
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move OK: Select
3. A Common Interface main menu will pop up.
Press the buttons to select the items and
press the ENTER
Common Interface
Viaccess Conditional Access
Main Menu
1. Consultation
2. Settings
3. Upgrade
Press 'OK' to confirm, 'EXIT' to quit
Move OK: Select
4. Press the EXIT button to exit the menu.
The common interface allows the use of a
Common Access Module to enable you to view
scrambled (pay to view) services. These services
are provided by TopUp TV (UK only) and others.
The Common Access Module and viewing card
can be obtained from the service provider.
Do not repeatedly insert or remove the Common
Access Module as this may damage the interface
and cause a malfunction.
button
or ENTER
Cable
Off
MENU: Return EXIT: Exit
MENU: Return EXIT: Exit
This feature is not available in all country.
C CI (Common Interface)
Allows the Common Access Module to be A
inserted and access the content that has been in
encrypted.
To insert the Common Access Module
1. Before you insert the Common Access
Module, ensure that the TV is switched off and
the viewing card is inserted in accordance with
the Service Provider's instructions.
2. Insert the Common Access Module into the
slot. Flip the Common Access Module to another
side and try again if you feel resistance.
3. Switch the TV on.
1. Before you remove the Common Access
Module, ensure that the TV is switched off.
2. Pull the Common Access Module from the
slot.
3. Switch the TV on.
Signal Information (DTV mode)
1. Press the MENU button to display the main
button.
2.
Information and then press the ENTER button
to view the Signal Information.
Common Access Module
Channel
ENTER
Signal
27