Lock System Management; Setup Management - JVC LT-32HG82WU Manual Del Usuario

Basic Feature
Channel management (ATV / DTV Mode)
Channel
Tuner Type
Auto Scan
Manual Scan
Auto Channel Update
Channel Edit
Favorite Manager
Common Interface
Signal Information
Move OK: Select
3. Press the EXIT button to exit the menu.

Lock System management

1. Press the MENU button to display the main
menu. Press the
System in the main menu, then press the
ENTER
2. Use the 0-9 buttons to input a 4-digit password
to enter the Lock System menu.
3. Press the buttons to select the option you
want to adjust in Lock System menu.
4. Press the
following settings.
Lock System
Enter Password
Enable
Channel Locks
Parental Rating
Lock Keypad
New Password
Clear Lock
Move
Default password "0000".
If you change the password, be sure to
remember the new password! If you forget
the new password, press the master
password"4711".
To access the Lock System menu, you must
enter the password. Enter the default password
"0000
Enable
The lock system is designed to prevent
accidental returning of the TV/losing channels
and prevent children watching unsuitable
programme.
28
Cable
Off
MENU: Return EXIT: Exit
buttons to select
buttons to change the
_ _ _ _
Off
None
Off
_ _ _ _
0~9: Input MENU: Return EXIT: Exit
Lock System management
The Lock System must be set to On for this
function to operate. If the Lock System is set to
On, a valid password must be entered when you
access Auto Scan / Manual Scan / Channel Edit
/First Time Setup.
Channel Locks is designed to prevent children
watching unsuitable programmes. When a
channel is blocked, a valid password must be
entered.
Parental Rating
This function allows you to set up blocking
4-18.
or
Key Lock is designed to prevent children from
pressing the buttons on the TV. The Lock System
must be set On for this function to operate.
Use the 0-9 buttons to input the old password
and then input the new 4-digit password. Re-
Reset all the lock settings to the factory defaults.
5. Press the EXIT button to exit the menu.

Setup management

OSD Language
1. Press the MENU button to display the main
menu. Press the
in the main menu, then press the
2. Press the
Language and then press the
select your desired on-screen display language.
buttons to select Setup
or ENTER
buttons to select OSD
buttons to