Tabla de contenido
Publicidad
Installation
Instalare
05
[02] x2
Installation
A
All installation must be carried out by a competent person or qualified electrician. Before connecting the mains supply ensure that
the mains voltage corresponds to the voltage on the rating plate.
Direct Connection
This appliance must be connected directly to the mains using an omnipolar circuit breaker with a minimum opening of 3 mm
between contacts.
The installer must ensure that the correct electrical connection has been made and that it complies with the wiring diagram.
The cable must not be bent or compressed.
Regularly check the power cord for damage. If the supply cord is damaged, it must be replaced by a special cord or assembly
available from the manufacturer or its service agent.
WARNING: This is a Class I appliance and MUST be earthed.
This appliance is supplied with a 3 core mains cable coloured as follows:
Brown = L or Live
Blue = N or Neutral
Green and Yellow = E or Earth ⏚
EUR
N (Blue)
L (Brown)
⏚ (Green/Yellow)
Installation
Instalación
N
N
L
L
Montaż
UK
DOUBLE POLE SWITCHED
FUSED SPUR OUTLET
FUSE ON
USE A 13AMP FUSE
7
[02]
Publicidad
Tabla de contenido
