Uline H-214 Manual Del Usuario página 3

Top Shelf
Figure 6
Figure 7
Figure 8
Screw
PAGE 3 OF 12
ASSEMBLY CONTINUED
Upright
Screw
Figure 9
TOP SHELF AND DIVIDERS ASSEMBLY
1. Attach top shelf to uprights. Align top shelf mounting
holes (3rd hole from the ends of the shelf) with holes
in uprights. Use 1/4 - 20 x 5/8" round head screws
and nuts to secure shelf. (See Figure 6)
2. Attach top shelf dividers using #10 x 3/8" truss head
screws and nuts. Install up to 7 dividers.
(See Figure 7)
BOOK SHELF ASSEMBLY
1. Attach bookshelf to uprights. Align book shelf bolt
holes with the two bolt holes near top of uprights.
Secure with 1/4 - 20 x 2" hex bolts, washers and nuts.
(See Figure 8)
ADDITIONAL ASSEMBLY
1. Install hold down bars. Align holes in bars with the
two bolt holes found near the back of the table top.
Secure with two #10 x 3" round head screws.
(See Figure 9)
2. Install drawer. Slide drawer into channels located
underneath the right side of the tabletop.
0521 IH-214