Troubleshooting Guide - Kenwood TCM810 Instrucciones

troubleshooting guide

Problem
Toaster does not
operate.
Carriage lever not
staying down
Uneven Browning.
Toast colour too
light or too dark.
Burning smell or
smoke from slots.
If none of the above see "Service & Customer Care".
English
Cause
No power.
Toaster not plugged
in.
1 Slice of bread being
toasted.
Bread slices of
different size,
freshness or thickness
being toasted at same
time.
Wrong browning
setting used.
Crumb tray full.
Food particles stuck
to element or loose in
toasting slots.
8
Solution
Check toaster is
plugged in.
Check the fuse/circuit
breaker in your home.
The lever will not
stay down unless the
toaster is plugged in.
For best results
ensure that the bread
slices are of an even
thickness, freshness
and size.
In order to achieve
uniform browning
we recommend you
wait a minimum of
30 seconds between
each toasting so
that the control can
automatically reset.
Alternatively select
a lower setting when
additional toasting is
carried out.
Select a higher or
lower browning
setting.
Refer to "hint" section.
Unplug before
checking the slots.
Remove any loose
food particles.
Remove and clean the
crumb tray.