Safety Notes - Würth HL 10-A Traducción Del Manual De Instrucciones De Servicio Original

Read all safety warnings and all instructions. Failure to
follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
 Please read and observe all safety warnings and instructions
enclosed with the battery or the power tool, with which the bat-
tery was provided.
 Handle the cordless worklight with care. The cordless worklight
generates intense heat, which leads to increased danger of fire and explosion.
 Do not work with the cordless worklight in hazardous areas.
 After the automatic shut-off of the cordless worklight, do not
continue to press the On/Off button. The battery could become dam-
aged.
Do not direct the light beam at persons or animals
and do not stare into the light beam yourself (not
even from a distance).
 Do not cover off the lamp head while operating the cordless
worklight. The lamp head heats up during operation and can cause burns
when the heat accumulates.
 Do not use the cordless worklight in road traffic. The cordless work-
light is not approved for illumination in road traffic.
 Before any work on the cordless worklight itself (e.g. assem-
bling, maintenance, etc.), as well as when transporting and stor-
ing, remove the battery from the cordless worklight.
 Do not allow children to use the cordless worklight. It is intended
for professional use. Children can unintentionally blind themselves or other per-
sons.
 Do not open the battery. Danger of short-circuiting.

Safety Notes

13