Connect Using The Soundtouch 300 Remote; Check For Sound - Bose Surround Manual De Instrucciones

1. On your soundbar's remote, press the SoundTouch button e.

CONNECT USING THE SOUNDTOUCH 300 REMOTE

2. Press and hold k until the connectivity l light on the soundbar blinks white.
Once connected, you hear a tone. The light on the back of the wireless receivers
and l on the soundbar glow white.
NOTES: Connecting may take several minutes.
If the surround speakers don't connect to the soundbar, see
"Troubleshooting" on page 22.

CHECK FOR SOUND

NOTE: To avoid hearing distorted audio, turn off your TV speakers. Refer to your TV
owner's guide for more information.
1. Power on your TV.
2. If you are using a cable/satellite box or other secondary source:
a. Power on this source.
b. If this source is connected to your TV, select the appropriate TV input.
3. Power on the soundbar.
You hear sound coming from the surround speakers.
NOTE: If you don't hear sound from the surround speakers, see "Troubleshooting"
on page 23.
CON N ECT TO A SO UN D BA R
1 9
|
E N G