Bostitch BRN175A Manual De Instrucciones página 10

English
Air supply-Pressure and Volume
Air volume is as important as air pressure. The air volume
supplied to the tool may be inadequate because of
undersize fittings and hoses, or from the effects of dirt and
water in the system. Restricted air flow will prevent the tool
from receiving an adequate volume of air, even though the
pressure reading is high. The results will be slow operation,
misfeeds or reduced driving power. Before evaluating tool
problems for these symptoms, trace the air supply from the
tool to the supply source for restrictive connectors, swivel
fittings, low points containing water and anything else that
would prevent full volume flow of air to the tool.
Register Online
Thank you for your purchase. Register your product now for:
• WARRAnTY sERViCE: Registering your product will
help you obtain more efficient warranty service in case
there is a problem with your product.
COnFiRMATiOn OF OWnERshiP: In case of
•
an insurance loss, such as fire, flood or theft, your
registration of ownership will serve as your proof
of purchase.
• FOR YOUR sAFETY: Registering your product will
allow us to contact you in the unlikely event a safety
notification is required under the Federal Consumer
Safety Act.
Register online at www.bostitch.com/support/product-
registration.
Accessories

WARNING: Since accessories, other than those
offered by BOSTITCH have not been tested with this
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only BOSTITCH
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center. If you need assistance in locating any
accessory, please contact BOSTITCH, call 1-800 262-2161.
8