Safety Information - Bostitch BRN175A Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

English

BOSTITCH tools are precision-built tools, designed for

precise, high volume nailing. These tools will deliver

efficient, dependable service when used correctly and with

care. As with any fine power tool, for best performance the

manufacturer's instructions must be followed. Please study

this manual before operating the tool and understand the

safety warnings and cautions. The instructions on

installation, operation and maintenance should be read

carefully, and the manual kept for reference.

nOTE: Additional safety measures may be required because

of your particular application of the tool. Contact your

BOSTITCH representative or distributor with any questions

concerning the tool and its use.

BOSTITCH, 701 E. Joppa Road, Towson, Maryland 21286, U.S.

& Canada Only.

BOSTITCH tools have been engineered

to provide excellent customer

satisfaction and are designed to

achieve maximum performance

when used with precision BOSTITCH

fasteners engineered to the same

exacting standards.

BOsTiTCh cannot assume responsibility for product

performance if our tools are used with fasteners or

accessories not meeting the specific requirements

established for genuine BOsTiTCh nails, staples

and accessories.

Limited Warranty

U.s. and Canada Only

BOSTITCH Fastening Systems "BOSTITCH" warrants to

the original retail purchaser that the product purchased

is free from defects in material and workmanship, and

Coil Roofing Nailer: BRN175A

Tool specifications

Model

Length

Height

BRN175A

10.24"

10.63"

(260 mm)

(270 mm)

All dimentions in inches unless otherwise specified.

Fastener specifications

Model

Fastener

Diameter

BRN175A

15˚ coil

0.120"

roofing nails

(3 mm)

Tool Air Fitting: This tool uses a 1/4" N.P.T. male plug.

The inside diameter should be .275" (7 mm) or larger. The

fitting must be capable of discharging tool air pressure

when disconnected from the air supply. A 3/8" (9.5 mm)

male quick connector coupling is available from BOSTITCH

and may be used when a 1/4" (6.4 mm) supply line is

not available.

nOTE: A 3/8" (9.5 mm) supply line (and fittings) are required

for maximum tool performance.

Width

Weight

4.33"

5.3 lbs

(110 mm)

(2.4 kg)

Fastener Range

Capacity

3/4"–1-3/4"

120 nails

(19 mm–44.5 mm)

agrees to repair or replace, at BOSTITCH's option, any

defective BOSTITCH branded pneumatic stapler or nailer

for a period of seven (7) years from date of purchase (one

(1) year from the date of purchase for compressors and

tools used in production applications). Warranty is not

transferable. Proof of purchase date required. This warranty

covers only damage resulting from defects in material or

workmanship; it does not cover conditions or malfunctions

resulting from normal wear, neglect, abuse, accident or

repairs attempted or made by other than our national repair

center or authorized warranty service centers. Driver blades,

bumpers, o-rings, pistons and piston rings are considered

normally wearing parts. For optimal performance of your

BOSTITCH tool always use genuine BOSTITCH fasteners and

replacement parts.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES,

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED

TO THE IMPLIED WARRANTIES OF MERCHANTABILITY

OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH

SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES.

Some states and countries do not allow limitations on how

long an implied warranty lasts, or the exclusion or limitation

of incidental or consequential damages, so the above

limitations or exclusions may not apply to you. This warranty

gives you specific legal rights, and you may also have other

rights which vary from state to state and country to country.

To obtain warranty service in the U.S. return the product,

together with proof of purchase, to the U.S. BOSTITCH

National or Regional Independent Authorized Warranty

Service Center. In the U.S. you may call us at

1-800-556-6696 or visit www.BOSTITCH.com for the location

most convenient for you. In Canada please call us at

1-800-567-7705 or visit www.BOSTITCH.com

Operating Pressure: 70-120 p.s.i.g (5 to 8.5 kg/cm²/4.8

to 8.3 bar). Select the operating pressure within this range

for best fastener performance. DO NOT EXCEED THIS

RECOMMENDED OPERATING PRESSURE.

Air Consumption: The BRN175A requires 4.13 cubic feet

per minute (100 liters per minute) of free air to operate

at the rate of 100 fasteners per minute, at 80 p.s.i. (5.6 kg/

). Take the actual rate at which the tool will be run

to determine the amount of air required. For instance, if

your fastener usage averages 50 fasteners per minute, you

need 50% of the tool's c.f.m. of free air which is required to

operate the tool at 100 fasteners per minute.

Trigger: The BRN175A is equipped with a contact trigger.

Refer to the Actuating Tool section for more information.