Festo CPV-SC Manual De Instrucciones página 14

2 Multipin connection
2.1 Multipin plug
For controlling the valves, each valve solenoid coil (re-
ferred to in the following as coil) is assigned to a certain
pin of the multipin plug. Each valve location has max. one
valve coil. Double-solenoid valves therefore require two
valve locations. A valve location always occupies an ad-
dress, even if it is fitted with a blanking plate, separator
plate or valve plate.
Caution
The components of the valve terminal contain electros-
tatically sensitive elements. The components will be
damaged if you touch the contact surfaces of the plug
connectors and if you do not observe the regulations
for handling electrostatically sensitive components.
Long signal cables reduce the immunity to interference.
Do not exceed the maximum permitted signal cable
length of 10 m.
Recommendation:
Use multipin plugs and cables from the Festo range for
connecting the CPV-SC valve terminal.
14 Festo CPVSC 0301a English