Connecting Your Peripherals; Connecting Your External Displays - Toshiba dynadock 4K Guía De Usuario

Setting Up the dynadock 4K docking station
NOTE
NOTE

Connecting your peripherals

Once you have set up a USB cable connection between your
computer and the dynadock 4K docking station, you can
then connect your computer peripherals to the appropriate
ports on the dynadock 4K docking station.

Connecting your external displays

(Sample Illustration) External display connections on the
dynadock 4K docking station
NOTE
and Connecting Peripherals
The dynadock 4K docking station should be
connected to a USB 3.0 port for optimal
performance.
The dynadock 4K docking station will work when
connected to a USB 2.0, but performance may be
compromised.
To disconnect the dynadock 4K docking station from
your computer, directly unplug the cable from the
computer. The computer is now undocked.
If a USB storage device is connected to the
dynadock 4K docking station, make sure you save
the data located on the USB device, and then remove
the USB device first before undocking.
HDMI™ Out port
DVI-I video Out port
Two displays can be connected to the dynadock 4K
docking station at the same time.
21