Adjusting Audio Settings; Configuring Audio Ports - Toshiba dynadock 4K Guía De Usuario

32
Using the dynadock 4K Docking Station and
Adjusting Settings

Adjusting audio settings

Configuring audio ports

You can playback or record audio either through the
dynadock 4K docking station's audio ports or the docked
computer's audio ports. However, you cannot use the audio
ports on the docked computer and on the dynadock 4K
docking station at the same time.
Upon docking connection, the audio ports on the dynadock
4K docking station may become enabled and the audio
ports on the computer disabled. When you undock the
computer, the audio ports on the computer are automatically
re-enabled.
To change the default settings, you may need to manually
adjust the audio settings in Windows
section. For example, if you want to use the computer's
audio ports while the computer is docked, you will need to
change the default settings.
Configuring audio playback ports
1 Click the
tray/notification area of your Windows
(Sample Image) TOSHIBA dynadock 4K icon
NOTE
2 Select
3 On the
dialog box, select one of the following:
❖
dynadock 4K
If the icon is not visible in your system tray/notification
area, make sure the dynadock 4K docking station is
connected and docked, and then click the
Hidden Icons
hidden icons.
Audio Setup
Playback
To use the dynadock 4K docking station's
Headphone/Speakers/Line out jack, select
dynadock Audio
( ) icon in the system
( ) button, if necessary, to display
from the menu.
tab of the Windows
device.
®
, as described in this
®
desktop.
Show
®
sound settings