Connecting Usb Devices - Toshiba dynadock 4K Guía De Usuario

Setting Up the dynadock 4K docking station
Use this port:
HDMI™ Out port
and DisplayPort™
NOTE
NOTE
NOTE
NOTE

Connecting USB devices

The dynadock 4K docking station provides six USB 3.0 ports
to connect peripheral devices to; four USB 3.0 ports on the
back and two USB 3.0 ports on the front.
This section provides basic instructions for connecting most
USB devices to the dynadock 4K docking station. Please
check the documentation that came with your USB device
for any special instructions.
NOTE
and Connecting Peripherals
Audio Device:
Home
stereos/speakers
Surround sound capability is dependent on the optional
peripherals and software available on the computer
connected to the dynadock 4K, please consult your
computer or peripheral manufacturers regarding this
support.
To use the HDMI™ Out port or DisplayPort™, slide the
display ports cover up/down. Only one display port can be
used at a time.
If there is no audio device connected to the dynadock 4K
docking station, the computer's audio ports may remain
enabled.
If you make any changes to your audio settings, audio
ports and the dynadock 4K docking station, you may
need to restart your media player for those changes to
take effect.
You do not need to turn off the dynadock 4K docking
station or the docked computer before connecting a
USB device.
Activity:
Stereo and/or surround
sound function
25