Adjusting Audio Settings; Configuring Audio Ports - Toshiba dynadock U3.0 Guía De Usuario

Adjusting audio settings

Configuring audio ports

You can playback or record audio either through the dynadock's
audio ports or the docked computer's audio ports. However, you
cannot use the audio ports on the docked computer and on the
dynadock™ at the same time.
Upon docking connection, the audio ports on the dynadock™ may
become enabled and the audio ports on the computer disabled.
When you undock the computer, the audio ports on the computer
are automatically
re-enabled.
To change the default settings, you may need to manually adjust the
audio settings in Windows
example, if you want to use the computer's audio ports while the
computer is docked, you will need to change the default settings.
Configuring audio playback ports
1 Click the dynadock U3.0 icon in the system
tray/notification area of your Windows
(Sample Image) TOSHIBA dynadock™ U3.0 icon
NOTE
Using the dynadock™ and Adjusting Settings
If the icon is not visible in your system tray/notification area, make
sure the dynadock™ is connected and docked, and then click the
Show Hidden Icons button (
icons.
®
, as described in this section. For
), if necessary, to display hidden
®
desktop.
31