SICK GTE6-Line Instrucciones De Operación página 3

3
COMMISSIONING
2
Operating reserve
1,000
100
10
20 %/90 %
3
1
90 %/90 %
2
6 %/90 %
1
0
0 20 40 60 80 100
(0.79) (1.57) (2.36) (3.15) (3.94)
Distance in mm (inch)
Image: H
2 Mount the sensor using a suitable mounting bracket (see the SICK range of acces‐
sories).
Note the sensor's maximum permissible tightening torque of 0.4 Nm.
3 The sensors must be connected in a voltage-free state (V
in the graphics [B] must be observed, depending on the type of connection:
– Male connector connection: pin assignment
– Cable: core color
1
brn
+ (L+)
2
wht
not connected
3
blu
- (M)
4
blk
Q
Image: B GTE6-P/N4xxx, -P/N6xxx, -P/N7xxx
Only apply voltage / switch on the power supply (V
nections have been completed. The green LED indicator lights up on the sensor.
Explanations of the connection diagram (graphic B):
Switching output Q (according to graphic C):
GTE6-P (PNP: load -> M)
GTE6-N (NPN: load -> L+)
L = light switching
D = dark-switching
4 Align the sensor with the object. Select the position so that the red emitted light
beam hits the center of the object. You must ensure that the optical opening (front
screen) of the sensor is completely clear [E].
≈ 5 ... 7 °
Image: E
120 140
(4.72) (5.51)
Image: B-2 GTE6-P/N1xxx
= 0 V). The information
S
brn
+ (L+)
blu
- (M)
blk
Q
> 0 V) once all electrical con‐
S
8015312 | SICK
Subject to change without notice