Lcd Panel Abbreviations; Setup Menu - Tripp-Lite SmartOnline S3MX Serie El Manual Del Propietario

4. Operation

4.6 LCD Panel Abbreviations

Abbreviation Display content
ENA
DIS
ATO
BAT
NCF
CF
SUB
ADD
ON
OFF
FBD
OPN

4.7 Setup Menu

Press and hold the Test/Up and Mute/Down buttons simultaneously for longer than one second to enter/exit the Setup Menu.
There are three parameters to set up the UPS. Refer to the illustration below.
Parameter 1 is for program alternatives. Refer to below tables for the programs to set up.
Parameter 2 and Parameter 3 are the setting options or values for each program.
The display will time out after 10 minutes of inactivity. This feature is always enabled.
Note: Use the "Up" or "Down" button to change the programs or parameters.
Meaning
Enable
Disable
Auto
Battery
Normal Mode (not CVCF
Mode)
CVCF Mode
Subtract
Add
On
Off
Not allowed
Allow
Parameter 1
Parameter 2
Abbreviation Display content
RES
N.L
CHE
OP .V
PAR
RN
SN
TN
RS
ST
TR
HS.H
Parameter 3
32
Meaning
Reserved
Neutral line loss
Check
Output voltage
Parallel, 001 means the
first UPS
The first phase
The second phase
The third phase
The first line
The second line
The third line
Hot standby