End Of Cycle Signal - Alliance Laundry Systems Speed Queen LES37AW Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

To Dry Clothes
IMPORTANT: See the INSTALLATION
INSTRUCTIONS before using dryer.
IMPORTANT: Before using dryer for the first
time, use an all-purpose cleaner, or a detergent
and water solution, and a damp cloth to remove
shipping dust from inside dryer drum.
1. Sort items into
separate loads.
2. Clean lint filter
D441IE0A
3. Add clothes
loosely into
dryer drum.
Add fabric
softener sheet,
if desired.
4. Close loading
door. Dryer will
not operate with
the door open.
D326IE1A
3
5. Select Fabric
Selector.
Follow garment
manufacturer's
care labels for
recommended
temperature
settings.
6. Select timer setting in cycle desired:
AUTOMATIC REGULAR/DELICATE,
TIME DRY, and AUTOMATIC
PERMANENT PRESS/KNITS. These cycles
control the drying time
D305IE1A
before each
use.
The ENERGY SAVER/DAMP DRY settings,
marked with a dot (•), show which dryer settings
will use the least energy and will leave items damp
for easier ironing.
7. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door
D442IE0A
or turn timer knob to an OFF position. To
restart dryer, close door, reset timer if
necessary, and push in the timer knob.

End of Cycle Signal

The volume of the signal tone
may be set on OFF, LOUD or
between the two selections. If
a volume level is selected, the
signal will let you know
when the cycle is done. The
signal will stop when the
door is opened, or when the
timer is advanced to an OFF position.
505305R1

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Speed queen lgs37aw

Tabla de contenido