Dörr DM220 Manual De Instrucciones página 2

DÖRR DM220 Condenser Microphon
Instruction Manual
Thank you for the purchase of the DÖRR DM220 condenser microphone. DÖRR DM220 is especially designed for camera, interviews and other applications.
It matches with a majority of video camera brands, SLR camera and can simply be fixed on the camera. Please read this manual carefully before using the
microphone to make sure the correct operation and to exert the optimum functions.
Functions
• High sensitivity condenser microphone specially designed for camera
• Cardioid directivity characteristic can effectively reduce the ambient noise
• Optional +10dB amplifier and 200Hz bass filter meet the demand of many applications
• Standard hot shoe for easy connection with camera
• Shock proof design can reduce the mechanical noise of cameras and other vibration noise
• Rugged aluminum housing features effective EMI resistance
• Powered by 1.5V AA alkaline battery, playtime is up to 100hrs
• Low power indicator
Name of Parts and their Function
Specifications
Transducer Principle Condenser microphone
Directivity Characteristic Cardioid
Frequency Response 50Hz – 16kHz
Sensitivity -32dB +/- 3dB (0dB = 1V/Pa bei 1kHz)
Selectable Amplifier +10dB
Bass Filter 10dB/Oktave bei 60Hz
Output Impedance 2000 Ohm +/-30%
Power Requirement 1 x 1,5V AA-Batterie
Caution!
1. The sensitivity of condenser microphone Is too high to fall from high place or given strong shock.
2. When the condenser microphone is not used, please store it in dry and clean place. To avoid the effect of sensitivity and timbre, keep the microphone off places with
high temperature/humidity and strong magnetic field.
3. When you stop using condenser microphone, please turn the power switch off to save battery power.
4. When you plan not to use the microphones for a longer period, remove the batteries to avoid battery liquid leakage causing circuit damage.
Included
1x Windscreen
1x Microphone
1x Battery
1x User manual
1x Pouch
The CE marking complies with the European directives.
You can download the relative EU declaration of conformity with following link:
http://www.doerrfoto.de/info/EG-Konformitätserklärungen
*Related specifications and configuration are subject to change without notice. 07/2013
①
Power switch: Push to "ON" to turn on the microphone, push to "OFF" to turn it off
②
Sensitivity tone up switch: Tone up the volume of microphone
③
Bass filter switch: Turn it on can reduce the ambient noise
④
Power indicator: Turn on the power switch, the indicator is green; when it is at low
power, the indicator is red
⑤
Wind screen
⑥
Battery compartment
⑦
Camera clip nut
⑧
Shock mount: Reduces the mechanical noise of cameras and other vibration noise
Operation instruction
1. Open the battery compartment and correctly install the battery according to the
marks of positive and negative polar
2. Turn the camera clip nut right, then clip the microphone in the camera socket and
turn left to fix it
3. Insert the 3,5mm plug of connecting cable into microphone input socket of your
camera, the microphone will work when you turn it on
4. The microphone meets the demand of many applications and provides an optional
+10dB amplifier and 200Hz bass filter
DÖRR GmbH
Postfach 128 • 89202 Neu-Ulm/Germany
Fon +49 731 97037-0 • Fax +49 731 97037-37
info@doerrfoto.de • www.doerrfoto.de
GB