Overview; Design And Function; Choosing The Correct Pneumatic Hammer For A Task; Main Parts - Chicago Pneumatic CP 4123 Instrucciones De Seguridad Y De Funcionamiento

CP 4123, CP 4125

Overview

To reduce the risk of serious injury or death
to yourself or others, read the Safety
instructions section found on the previous
pages of this manual before operating the
machine.

Design and function

CP 4123 is a pneumatic tool designed for rugged
use in foundries, fabrication shops and construction
applications. The different stroke versions offer the
power levels necessary for a variety of applications,
from light to medium chipping and trimming
through heavy cutting. The machine can be used
both horizontally and vertically. No other use is
permitted.
CP 4125 is a pneumatic tool designed for rugged
use in foundries, shipyards, refineries, fabrication
shops and construction applications. The different
stroke versions offer the power levels necessary for
a variety of applications from light to medium
chipping and trimming through heavy cutting. The
machine can be used both horizontally and
vertically. No other use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
pneumatic hammer for a
task
It is important to choose the correct size of
pneumatic hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
> If it takes less than 5 seconds a smaller pneumatic
hammer should be selected.
> If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
9800 0606 90a | Original instructions
Safety and operating instructions

Main parts

B
C
Handle
A.
B. Start and stop device (Trigger)
Tool retainer
C.
Air inlet
D.
Cylinder
E.
F. Lock coil

Labels

The machine is fitted with labels containing
important information about personal safety and
machine maintenance. The labels must be in such
condition that they are easy to read. New labels can
be ordered from the spare parts list.
Data plate
A C
B
Machine type
A.
B. Maximum permitted compressed air pressure
C. Serial number
D
A
E
F
D E
11