Safety Instructions; General Safety Instructions; Specific Safety Instructions; For Mitre Saws - Femi D 305 Manual Del Usuario

SAFETY INSTRUCTIONS

WARNING:
Besides following the instructions mentioned in
this manual, when using electric equipment you
must always observe all safety precautions to
prevent risk of fi re, electric shock and personal
injury.
Read this instruction manual before use and keep it
carefully.
The probability of risk can be reduced by the machine safety
equipment of the machines, as for example protections,
blade case, clamping, stoppage and the personal protection
devices as protective goggles, dust mask, ear plugs,
protective shoes and gloves. However, even the best
protection devices cannot protect you from the risks due to
lack of good sense and attention. Have always good sense
and observe the necessary precautions. Carry out only the
works that you consider safe. DO NOT FORGET: everyone
is responsible for his safety.
This tool has been designed for specifi c purposes. We
recommend you not to modify it or use it for purposes diff erent
from the ones for which it has been manufactured. If you
have any doubts regarding specifi c applications, do not use
the machine before having contacted Femi and received
our instructions.
READ AND KEEP THIS MANUAL

GENERAL SAFETY INSTRUCTIONS

1. Keep the work surface clean. If the work area or surface
is busy the probability of injuries is higher.
2. Do not use the machine in dangerous environment
conditions. In order to prevent electric shock, do not
expose the machine to rain and do not use it in a damp
area. Keep the work area illuminated. Do not use the
machine near gas or infl ammable substances.
3. Connect the dust collection device. If the machine is
equipped with a dust collection device, make sure that
this system is connected and correctly used.
4. Keep unknown persons and children away from the
machine. All unknown persons and children must keep
a safe distance from the work area.
5. Protect yourself from electric shock. Avoid any contact
with earthing surfaces.
6. Handle the power supply cable with care. Do not pull the
electric cable to disconnect it from the plug. Keep the
electric cable away from heat, oil and sharp edges.
7. Use extension cables designed for outdoor use. When
using the machine outdoors, use only extension cables
suitable for outdoor use, having specifi c indications.
8. Be vigilant. Check carefully what you are doing, have
good sense. Do not use the machine if you are tired.
9. Do not use the machine if you are have taken medicines,
alcohol, drugs.
10. Avoid accidental starts. Be sure that the switch is on the
OFF position before inserting the plug into the socket.
11. Wear suitable clothing. Do not wear loose-sleeved
garments or pieces of jewellery which may get caught
in the moving parts. For outdoor use we recommend
non-slip shoes. If necessary, use headgear to cover
hair.
12. Use always personal protection devices: wear protective
goggles and masks in case dust or sawdust is produced.
Wear ear muff s or plugs in noisy areas. Wear gloves
when handling parts with sharp edges.
13. Do not be off balance over the machine. Always keep
fi rmly stand.
14. Ask for advices to skilled and qualifi ed people if you are
not familiar with using such a machine.
15. Remove the tools you do not use from the workbench.
If you do not use the tools, you must arrange them in
a dry area which is locked and away from the reach of
children.
16. Do not force the machine. You can obtain better and
safer results if you use the machine at the cutting
pressure for which it has been designed.
17. Use the suitable tool for the work you are processing. Do
not use a small tool for an intensive job. For example,
do not use a circular saw to cut branches or stumps.
18. Block the piece. If possible, use C-clamps or a holder
to fi x the piece. It is safer than using only your hands.
19. Keep the tools in perfect conditions. Keep the tools sharp
and clean to obtain better and safer results. Follow the
instructions to grease and change the accessories.
Check regularly the electric cable and change it if it is
damaged. Keep the handles and the handgrips dry,
clean, unoiled and ungreased.
20. Disconnect the tool from electricity if you do not use it,
before maintenance and change of the accessories or
tools such as blades, drills, mills, etc.
21. Remove locking and adjustment wrenches from the
workbench. Get used to check if the locking and
adjustment wrenches have been removed before
starting it.
22. Check the parts of the tool to verify that there are not any
damages. Before using the machine, check if the safety
devices or any other parts are damaged in order to be
sure that it works properly and that it can accomplish
the tasks for which it has been designed. Check that the
moving parts are aligned, do not stop and are not broken.
Check the assembly and any other condition that can
infl uence the functioning of the machine. Any damaged
part or protection must be repaired or changed from an
authorised after sales centre. Do not use the machine
if the switch does not work properly.
23. Use the machine, the tools and accessories in the
way and for the purposes mentioned i this manual.
Diff erent uses and parts can cause possible risks for
the operator.
24. Get the machine repaired by a qualifi ed person. This
electric tool is in compliance with local safety regulations.
The machine must be repaired only by qualifi ed people
who use original spareparts, otherwise risks may arise
for the operator.

SPECIFIC SAFETY INSTRUCTIONS

FOR MITRE SAWS

1. Do not use the saw without the protection devices in
position, especially after changing mode; ensure that it
is perfectly effi cient and properly maintained.
2. Replace the table insert when worn.
EN
15