Grundfos IO 112 Manual Del Usuario página 8

7.1.2 Analog input (falling/rising)
With DIP switch 3 it is possible to set whether an
alarm is to be given when the value from the analog
sensor rises above or falls below the limit set.
If "rising" has been selected, the indicator lights will
illuminate from the bottom and upwards as the value
rises.
Switch 3
7.1.3 Temperature sensor input (falling/rising)
With DIP switch 4 it is possible to set whether an
alarm is to be given when the value from the Pt1000
sensor rises above or falls below the limit set.
If "rising" has been selected, the indicator lights will
illuminate from the bottom and upwards as the value
rises.
Switch 4
7.1.4 Counter input (falling/rising)
With DIP switch 5 it is possible to set whether an
alarm is to be given when the counter value rises
above or falls below the limit set.
If "rising" has been selected, the indicator lights will
illuminate from the bottom and upwards as the value
rises.
Switch 5
8
ON DIP
1 2 3 4 5 6 7 8 9 10
3
3
ON DIP
1 2 3 4 5 6 7 8 9 10
4
4
ON DIP
1 2 3 4 5 6 7 8 9 10
5
5
If "falling" has been selected, the indicator lights will
illuminate from the top and downwards as the value
falls.
Description
Trips if the measured value is falling (>= limit).
Trips if the measured value is rising (<= limit).
If "falling" has been selected, the indicator lights will
illuminate from the top and downwards as the value
falls.
Description
Trips if the measured value is falling (>= limit).
Trips if the measured value is rising (<= limit).
If "falling" has been selected, the indicator lights will
illuminate from the top and downwards as the value
falls.
Description
Trips if the measured value is falling (>= limit).
Trips if the measured value is rising (<= limit).