Publicidad
General Documentation Information
General Documentation Information
Refer to the following publications, which pertain to the installation and configuration of Cisco Content
Services Switches:
•
•
•
•
•
•
Agency Approvals
Table 1 lists the regulatory approval requirements for the Cisco Content Services Switches.
Table 1
Regulatory Requirement Category
Electromagnetic Compliance (Emissions) FCC Class A
Immunity
FCC Class A Compliance Notice (United States)
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio-frequency energy and, if not installed and used in accordance with the
Regulatory Compliance and Safety Information for the Cisco CSS 11150 and CSS 11800
2
Cisco Content Services Switch Getting Started Guide
Cisco Content Services Switch Basic Configuration Guide
Cisco Content Services Switch Advanced Configuration Guide
Cisco Content Services Switch Command Reference
Cisco Content Services Switch WebNS Device Management User Interface Quick Start Guide
Cisco Content Services Switch Software Version 5.00 Release Note
Regulatory Approval Requirements
Approval Agency and Requirement
ICES-003 Class A
EN55022 Class A
VCCI Class A
AS/NZS 3548 Class A
EN55024
EN50082-1
EN61000-3-2/IEC-1000-3-2 (Power line harmonics)
EN61000-4-2/IEC-1000-4-2 (ESD)
EN61000-4-3/IEC-1000-4-3 (Radiated immunity)
EN61000-4-4/IEC-1000-4-4 (EFT)
EN61000-4-5/IEC-1000-4-5 (Surge)
EN61000-4-6/IEC-1000-4-6 (Low frequency conducted
immunity)
EN61000-4-11/IEC-1000-4-11 (Voltage dips and sags)
78-12341-01
Publicidad
