Operation - Gardena 1285 Instrucciones De Empleo

Conventional installation [ Fig. I7 ]:
If using Art. 2750 / 2751 / 2752 / 2753 / 2755 the points
marked with an arrow must be sealed with sealing tape
(e. g. Art. 7219).

4. OPERATION

To adjust the valve control [ Fig. O1 ]:
Fully Automatic Control:
Time-controlled irrigation with the GARDENA Bluetooth
App.
An automatically opened valve can be closed manually via
the Man. Button on the valve or in the App.
v Set the selection lever
Manual Control:
Permanent water flow, independent of the time control.
v Set the selection lever
1285-20.960.01.indb 19
(13) to AUTO / OFF.
(13)
to ON.
Factory Reset [ Fig. F1 / I1 ]:
The Irrigation Valve 9 V Bluetooth
factory settings.
®
1. Remove the battery
2. Push and hold the Man. Button
(B)
battery in the battery compartment
polarity + / –).
3. Push and hold the Man. Button
10 seconds.
After approx. 10 seconds the factory setting is restored
and the connection LED is flashing.
will be reset to the
®
(B) .
(4)
and place the
(5)
(note the
(4)
for another
18.01.21 15:29
19