Storage; Repair; Maintenance And Care - AL-KO 3.22 SE Manual De Instrucciones

GB

Storage

„ Always unplug the machine from the mains before
storing
„ To save space when storing the lawnmower, fold
down the top handlebar
„ Store the machine in a dry place inaccessible to
children and unauthorised persons

Repair

„ Repair work may only be carried out by AL-KO
service centres and authorised specialist work-
shops
„ To prevent any imbalance, only replace cutters and
fastening pins as a set

Maintenance and care

Important – Danger of injury!
Always unplug from the mains before any mainte-
nance and preventive maintenance work.
Always wear work gloves when carrying out
maintenance and preventive maintenance work
on the cutting blade.
Unbalanced cutting blades cause strong vibra-
tions and damage the mower.
„ Check the grass catcher regularly correct operation
and wear
„ After mowing the lawn, clean the machine thor-
oughly with a hand brush or cloth. Contamination
on the underside of the machine can impair the
function of the machine if not removed
„ Do not spray the machine with water. The start
switch and the electric motor can be irreparably
damaged if water gets into them.
„ Check the cutting blade regularly for damage. Only
have blunt or damaged cutting blades sharpened/
replaced by an AL-KO service centre or authorised
specialist company. Resharpened cutting blades
must be balanced.
Tightening torque of the blade screw 15 Nm +5.
19
Important!
The blades and motor shaft must not be aligned.
After maintenance work on insulated parts
(e.g. replacement of the cutting blade), an
insulation protection check must be carried out in
accordance with VDE Directive 701.
„ Professional inspection is required:
after running into an obstacle
„
if the motor stops suddenly
„
if the cutting blade is bent
„
if the motor shaft is bent
„
Translation of the original instructions for use
Electric lawnmower