Operating Procedure - Siemens iQ700 Instrucciones Para El Uso

Operating procedure

The most effective method of removing
vapours produced during cooking is to:
❑ Switch the ventilator ON
as soon as you begin cooking.
❑ Switch the ventilator OFF
a few minutes after you have finished
cooking.
Light
Fan OFF Reduce fan speed
Acoustic signal:
❑ When a button is pressed, this is verified
by an acoustic signal.
Switching the fan ON
❑ Press the + button.
Setting the required fan speed:
❑ Press the + button.
The fan speed is increased by one step.
❑ Press the – button.
The fan speed is reduced by one step.
Switching the fan OFF:
❑ Press the 0 button.
{
The displayed goes out shortly
afterwards.
Or:
❑ Keep pressing the – button until the fan
switches off.
{
The displayed goes out shortly
afterwards.
14
Display for Fan follow-
fan setting on
Fan ON and
increase
speed
Intensive
setting
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
❑ Keep pressing the + button until a
appears in the display.
❑ If the intensive setting is not cancelled by
hand, the fan will automatically switch
}
back to step after 10 minutes.
Fan follow-on:
❑ Press the
button.
The fan continues to run at step
10 minutes, and at the same time a dot
flashes in the display. After this period
the fan switches off automatically.
Lighting:
❑ The light can be switched on at any
time, even though the fan is switched off.
ç
|
for