Tripp-Lite SmartPro 1U El Manual Del Propietario página 5

Quick Installation
Plug your equipment into the
4
UPS.*
Plug your equipment into the UPS. Repeat
step 3 above using the additional power
cord(s) that came with the UPS.
Note: Additional interconnection cords (C13 to C14)
are available from Tripp Lite. Call 773.869.1234
(Part # P004-006).
* Your UPS is designed to support only computer
equipment. You will overload the UPS if the total VA
ratings for all the equipment you connect exceeds
the UPS's Output Capacity (see Specifications). To
find your equipment's VA ratings, look on their
nameplates. If the equipment is listed in amps,
multiply the number of amps by 230 to determine
VA. (Example: 1 amp × 230 = 230 VA). If you are
unsure if you have overloaded the UPS's outlets,
see "OUTPUT LOAD LEVEL " LED description.
Turn the UPS ON.
5
Press and hold the "ON/OFF/STANDBY"
button for one second. The alarm will beep
once briefly after one second has passed.
Release the button.
19-04-288-9332C7.indb 5
4
5
5
4/26/2019 11:13:46 AM