USING THE INTELLIGENT PROGRAMS
1. Press the "
" (Fig. 5) power button to turn the appliance on.
The power light will blink, meaning the appliance is active and
ready to use.
2. Put the ingredients into the jar.
3. Tightly screw in the bottom of the cup with the blade.
4. Choose the intelligent program appropriate for your recipe
(Fig. 6 & 7).
- Frappé/Smoothie " " Program operates for approximately 35
seconds.
- Juice " " Program operates for approximately 60 seconds.
5. Once program completes, unit will stop automatically. PLEASE
NOTE: You may press the "
at any time.
6. Press the "
" (Fig. 5) power button to turn the appliance off.
This appliance is pre-programmed to turn off automatically if not used
for a period of several minutes. All lights will turn off when the unit
automatically powers down.
REMOVING CUP AND PLACING CAP
1. Once you have achieved desired result, unplug unit from
electrical outlet.
2. Remove cup from unit (Fig. 8).
3. Turn cup upside down and press unlock tab (Fig 9).
4. Remove threaded cup bottom with blade (Fig. 10).
5. Screw cap with drink-through/spill-proof lid (Fig. 11). Make sure the
cap lid is tightly closed to avoid spills.
6. Now your nutritious beverage is ready to be taken on the go.
CARE AND MAINTENANCE
The cups, cup caps and threaded cup bottom with blade can be hand
washed in warm, soapy water or on top rack of dishwasher. Rinse well
and dry. Wipe the base with a soft, damp cloth to clean. Never submerge
base in a liquid.
" power button to cancel the program
E n g l is h -5
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11