Using A Micro Sd Card; Video Recording - Car and Driver CDC-900 Manual De Usuario

when the Dash Cam is plugged into a car
that is experiencing ignition.
• The device will automatically be powered off
in accordance with the "Auto Off" setting.
Note: This is discussed more in the "Settings"
section
• To manually turn the device On/Off, press and
hold the "Power" button for three seconds.
Note: The LED indicator will glow solid blue
when the device is on.

Using a Micro SD Card

• The Dash Cam Supports SD cards of up to 32G
(sold separately).
• Locate the micro SD card slot on the side of
the dash cam and insert the micro SD card.
• To keep your Micro SD card in good condition,
please reformat it regularly. Reformatting
erases all locked (Saved) content, be sure to
offload your photos and videos prior to
reformatting. Note: Details on how to
reformat your card are located below in the
settings section.
• After powering on, the device will
automatically begin recording. Press the
"OK" Button to stop/and restart recording.
Note: Using the "Ok" Button to stop
recording automatically forces the Dash

Video Recording

4