Philips Satinelle HP6481/00 Manual De Instrucciones página 16

EnglisH
16
Problem
It is not
possible to
remove the
epilating
head.
The shaving
head
(HP6483
only) cannot
be removed.
Reduced
shaving
performance
(HP6483
only).
Stronger skin
irritation
than usual
after shaving
(HP6483
only).
Cause
You did not
freeze the
ice gel pad long
enough.
You
did not press
the release
button.
You did not
press the
release button.
The shaving
head is dirty.
The cutter unit
of the
shaving unit is
damaged or
worn.
Solution
Put the ice gel pad without the
cooling glove in the freezer or
freezing compartment (***) for at
least 2 hours.
Press the release button and pull the
epilating head off the appliance (Fig.
14).
Press the release button and pull the
shaving head off the appliance (Fig.
14).
Switch off the appliance and unplug
it. Remove the shaving head and pull
the cutter unit out of the shaving
head. Clean the shaving head and
the cutter unit with the cleaning
brush or under the tap. Remove any
hairs that may have got stuck under
the trimmers.
Replace the cutter unit.