Ibanez MiMX30 Manual De Instrucciones página 15

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
DELAY&REVERB Section
6
Here you can control four different Delay&Reverb effects.
 FX knob: This control knob selects one of four DELAY&REVERB Effects. The
"DELAY&REVERB effects" table below shows details about what you can select
by the knob.
6
Effect
DELAY
ECHO
REVERB HL
REVERB RM
 MIX knob: This controls the mix level of DELAY&REVERB
effect level. When the MIX knob turned to all the way to the
left, effect is off.
 TAP switch: When the DELAY or ECHO effect is selected, this controls delay
time. When the REVERB HL or REVERB RM is selected, this controls decay
(length of reverberation).
* For details on TAP, refer to "TAP switch".
Note: You can't use REVEB HL or REVERB RM while using the rhythm section.
Rhythm section
7
Total twenty six types of rhythm patterns are available from the four rhythm banks.
The Rhythm Bank table on the right shows names of the patterns in each bank.
 RHYTHM knob: This controls the volume of the Rhythm volume.
 ON/OFF switch: This switch turns the rhythm pattern on/off.
 Rhythm bank access switch: ON/OFF switch works as bank access switch.
Press and hold down 3 seconds or longer, the Rhythm bank select switches will
be activated to be chosen.
 Rhythm bank select switches: There are 1-4 banks selectable. Press and hold
down the  Rhythm bank access switch, the Rhythm bank select switches will
be activated, then click and choose one of the Rhythm bank select switch.
 ←→ switches: These switches scroll rhythm patterns in each banks.
 TAP switch: This controls the rhythm speed in a range of 40bpm to 255bpm.
DELAY&REVERB Effects
Operation of Controllers
SELECT
MIX
TAP
FEEDBACK
MIX LEVEL
DELAY TIME
FEEDBACK
MIX LEVEL
DELAY TIME
TONE
MIX LEVEL
DECAY
TONE
MIX LEVEL
DECAY
7

Rhythm Bank
BANK
RHYTHM BANK 1
RHYTHM BANK 2
RHYTHM BANK 3
RHYTHM BANK 4
MASTER volume
8
This controls the final output that is sent to the speaker.
POWER switch
9
This is the power switch for the amp.
HEADPHONES/LINE OUT jack
10
This is an output terminal for either headphone or line out. Connect by stereo 1/4"
plug.
CD Input
11
This is a line level input jack. You can connect a portable CD player or MP3 player
here.
FOOTSWITCH jack
12
You can connect IFS2M (sold separately) momentary footswitch to this jack, control
channel switching and on/off of FX section.
AC Input
13
Connect the included power cable here.
PATTERN TYPE
HEAVY METAL 1
HEAVY METAL 2
HEAVY METAL 3
2 BASS SOUND 1
2 BASS SOUND 2
2 BASS SOUND 3
PROGRESSIVE METAL 1
PROGRESSIVE METAL 2
8 BEAT 1
8 BEAT 2
8 BEAT 3
8 BEAT SHUFFLE
16 BEAT
16 BEAT SHUFFLE
POP
FUNK 1
FUNK 2
FUNK 3
FUNK 4
FUNK METAL
DANCE 1
DANCE 2
SAMBA
16 BEAT JAZZ
3 PER 4
6 PER 8
13

Publicidad

Tabla de contenido
loading

Tabla de contenido