Connecting An Av Device - Sony HT-A9 Manual De Instrucciones

Connecting an AV Device

Connecting an AV Device
Compatible with the 2K/4K
Video Format
You can output sound such as Dolby
Atmos, Dolby TrueHD, and DTS:X in high
quality by connecting an AV device to
the speaker system.
1
Connect the HDMI OUT jack on the
AV device and HDMI IN jack on the
speaker system with an HDMI
cable (not supplied).
HDMI cable
(not supplied)
Blu-ray Disc player, set-top
box, gaming console, etc.
Note
Make sure that the connectors are firmly
inserted.
18
US
Tips
• If a TV is compatible with eARC, you can
also output the high quality sound by
connecting an AV device to the HDMI IN
jack on the TV. In this case, enable the
eARC function of the TV.
• Select the appropriate HDMI cable and
[HDMI Signal Format] setting according to
the video formats output from the device
connected to the speaker system. For
details, refer to Help Guide.
Connecting an AV Device
Compatible with the 8K
Video Format
When you connect an AV device with the
following methods, you can play 8K
video and high quality sound such as
Dolby Atmos, Dolby TrueHD, or DTS:X.
1
Connect the speaker system and
TV with the HDMI cable (supplied)
(page 16).
2
Check that the eARC compatible
HDMI IN jack on the TV is
compatible with the 8K video
input.
Refer to the operating instructions
of the TV.
3
Connect an AV device with one of
the following methods.