Performing Initial Settings - Sony HT-A9 Manual De Instrucciones

Performing Initial
Settings
1
Press  (power) on the remote
control supplied with the speaker
system to turn on the speaker
system.
Operate the remote control by
pointing it toward the front of the
control box.
When the speaker system turns on,
[SETUP] appears in the front panel
display.
PLEASE WAIT
2
Turn on the TV.
If the [Speaker connection check]
screen does not appear on the TV
screen, change the TV input setting
to the input that the speaker system
is connected.
3
Check that the connection between
the control box and four speakers
is completed on the TV screen.
The control box and speakers are
connected automatically.
 (power)
SETUP
The sound for connection
completion is output after the check
marks appear on all the speakers.
The power indicator of the speaker
lights in green when connecting to
the control box.
[ Speaker connection check]
Speaker connection check
Speaker connection successful.
Next
4
Perform initial settings by
following the on-screen
instructions.
[ Language]
Language
English
Français (France)
Français (Canada)
Select your language. Español
Deutsch
[ Sound Field Optimization]
Sound Field Optimization
Optimize the surround sound for your environment.
Optimization takes about a minute. A loud sound
may come from your speakers during optimization.
Do not make loud noises, walk or stand in front of
the speakers during optimization.
Start
Later
[ Easy Network Setup - Start]
Easy Network Setup - Start
Connect this unit to the Internet to:
- Use your mobile device to play streaming music on the unit.
- Install software updates to keep the latest functions available.
You can do this later from [Easy Setup] > [Easy Network Setup].
Next
Once [Setup is complete.] appears,
select [Finish].
Later
21
US