Pioneer X-SMC00 Manual De Instrucciones página 33

Additional information
Problem
Power is not supplied to the
USB storage device.
When an iPod/iPhone/iPad mini is connected
Problem
Can't operate the iPod/iPhone/iPad mini by the remote control.
Can't operate the iPod/iPhone/iPad mini.
Check
Is AUTH ERR displayed on the front
panel display? No power is supplied if
the power consumption is too high.
Remedy
Turn the power off then back on.
Turn the power off, then disconnect and reconnect the USB storage
device.
Press INPUT to switch to the other mode, then switch again to the
USB mode.
Remedy
Make sure the iPod/iPhone/iPad mini is connected correctly (refer
to Connecting your iPod/iPhone on page 16).
Make sure the iPod/iPhone/iPad mini is connected correctly (refer
to Connecting your iPod/iPhone on page 16).
If the iPod/iPhone/iPad mini is experiencing a hangup, try resetting
the iPod/iPhone/iPad mini, and reconnect it to the unit.
11
33
En