Satco NUVO 65-681 Instrucciones De Instalación Y Seguridad

CCT SELECTABLE LED DUSK TO
DAWN AREA LIGHT W/PHOTOCELL
Models: 65-681, 65-682, 65-683, 65-684, 65-685, 65-686
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
To reduce the risk of fire, electrical shock or injury to persons;
•
read and follow all warnings and installation instructions before
installing.
• All installation should be performed by a qualified electrician.
• To avoid electric shock, ensure power is turned off before
installation or inspection. All wiring must be installed in
accordance with Electrical Code and local electrical code.
• To prevent fire, this fixture is rated for use in 120-277V, 50-60Hz
protected circuit and 75°C rated supply wire.
• External 1-10V only passive dimmers are supported.
Visit Satco.com for list of compatible controls.
• To prevent product malfunction and/or electrical shock, this
product must be properly grounded.
To avoid damage and/or product malfunction, do not modify
•
the fixture or replace accessories without confirming with the
supplier first.
• To prevent wiring damage or abrasion, do not expose wiring to
edges of sheet metal or other sharp objects.
• Suitable for wet locations.
IMPORTANT:
This product must be installed in accordance
with the applicable installation code by a person familiar with the
construction and operation of the product and the hazards involved.
Optional Brackets:
(See page 2 for Installation Intructions)
There are two optional brackets for this fixture. The following are street light fixtures with the different brackets.
Pipe Arm
Installation
Wall
Installation
© Copyright 2020 Satco Products, Inc. 8/20
Item No.
65-681
65-682
65-683
65-684
65-685
65-686
WIRING DIAGRAM
Dim+
Dim–
ACL: Black/Brown
Green/Yellow
ACN: White/Blue
1
CCT Lumens
3000K/4000K/5000K 4060~4640
3000K/4000K/5000K 5600~6400
3000K/4000K/5000K 8400~9600
3000K/4000K/5000K 4060~4640
3000K/4000K/5000K 5600~6400
3000K/4000K/5000K 8400~9600
NOTE: Refer to
lamp label for
Dim+ and Dim–
wire color.
Satco Products, Inc.
Brentwood, NY 11717