Satco NUVO 65-655 Instrucciones De Instalación Y Seguridad

CCT SELECTABLE LED
SMALL WALL PACK
Models: 65-655, 65-656
INSTALLATION AND SAFETY INSTRUCTIONS
IMPORTANT: Read before installing fixture. Retain for future reference.
WARNING: Risk of Fire or Electric Shock
• To reduce the risk of personal injury or property damage from fire,
electric shock, falling parts, cuts/abrasions, and other hazards
read all warnings and instructions included with and on the fixture
and all fixture labels.
• Commercial installation, service and maintenance of luminaries
should be performed by a qualified licensed electrician. If you are
unsure about the installation or maintenance of the luminaries, consult
a qualified licensed electrician and check your local electrical code.
• Turn OFF power at fuse or circuit breaker before wiring fixture to the
power supply.
• Turn OFF power when you perform any maintenance.
• All connections should be capped with UL approved wire connectors.
• Risk of Burn. Make sure to disconnect power and allow fixture to cool
before handling.
• Verify that supply voltage is correct by comparing it with the luminaire
label information.
• Do not install in a hazardous atmosphere, except where the ambient
temperature does not exceed the rated operating temperature of
the fixture.
• Keep tightly closed when in operation.
Item No.
65-655 3000K/4000K/5000K
65-656 3000K/4000K/5000K
INSTALLATION: Wall Mount
STEP 1: Turn power OFF.
© Copyright 2020 Satco Products, Inc. 8/20
CCT Lumens
3650~3770
4200~5000
STEP 2: Unscrew the 4 screws
of the fixture lens. DO NOT
discarded the rubber sleeves
on the screws.
1
8 1/2" W x 8 7/16" H
(216mm W x 214.5mm H)
WIRING DIAGRAM
Fixture
STEP 3: Remove the fixture
lens, place it safely aside
during installation.
Satco Products, Inc.
Brentwood, NY 11717