Installation - HAMPTON BAY EC4188BK Guía De Uso Y Mantenimiento

Installation

1
Installing the bulb
□ Install the bulb (B) into the socket of the track head (A).
2
Installing the track head to the track
NOTE: The ground side of the track head (A) connector is the side with two metal tabs. The
ground side of the track section has an indented groove on the face and two internal copper strips.
The track head (A) can only be assembled if the ground sides of the track head (A) connector and
the track section are aligned.
Identify the ground side on the track head (A) connector and track section (sold separately).
□
□
Push the top portion of the track head (A) connector into the slot of the track section.
□
Pull down the connector's locking tab (C).
□ Twist the ground side of the track head (A) connector toward the ground side of the track section until
the track head (A) connector snaps into place.
A
Ground tab
C
Ground side of connector
Track (sold separately)
Ground groove
A
4
B