Coffee Temperature - Nuova Simonelli Jazz basic Manual De Instrucciones

COFFEE TEMPERATURE

DISPLAY/PROGRAMMING
(Basic Version)
To access coffee temperature display /
programming, the machine must be off.
1) Switch the machine off;
2) While keeping the coffee supply button
(6) pressed, switch the machine on;
3) Release now the button (6);
4) After few moments the machine
displays the temperature by means of
the sequential flashing of the cof f e e
supply button (5). Each flash corre-
sponds to 2 °C.
The displayed temperatures must be
added to the basic one of 86 °C.
Let us take a practical example:
1 flash corresponds to 86 °C
3 flashes correspond to 90 °C
4 flashes correspond to 92°C
5) Once the temperature has been
displayed, it can be changed, if desi-
red;
6) Every time the coffee supply button (6)
is pressed, the temperature increases
by 2 ° C. Once 96° C have been rea-
ched, the machine starts again from
86 °C..
7) Some moments after releasing the
button, the machine will start to display
the current temperature.
8) In order to leave the set-up of tempe-
rature, switch the machine off and
again on; the new selected temperatu-
re has now been stored and the
machine is ready to make coffee.
22
COFFEE TEMPERATURE
DISPLAY/PROGRAMMING
(Plus Version)
To access coffee temperature display/pro-
gramming, the machine must be on.
10) Keep the coffee supply button pressed
for about 10 seconds until the hot
water (7) and steam (9) indicators
come on.
11) Release the coffee dispensing button:
the coffee dispensing indicator light (5)
will flash quickly;
12) Keep the coffee supply button pressed
for about 3 seconds until the cof f e e
supply flashing light goes off.
13) The machine displays the temperature
by means of the sequential flashing of
the hot water (7) and steam (9) indica-
tor lights. Each flash of the hot water
indicator light (7) corresponds to 10
°C; each flash of the steam indicator
light (9) corresponds to 1°C. T h e
displayed temperatures must be
added to the basic temperature of
70°C.
Let us take a practical example:
Basic temperature: 70°C
2 flashes of the hot water indicator (7):
10 + 10 = 20°C
3 flashes of the steam indicator (9):
1 + 1 + 1 = 3°C
Total coffee temperature:
70 + 20 + 3 = 93°C
14)Once the temperature has been
displayed, if desired, the temperature
can be changed.
15) Every time the hot water button (8) is
pressed, the temperature increases by
1°C
16)Every time the steam button (10) is
pressed, the temperature drops by 1 °C.
17)After selecting the desired setting,
press the coffee supply button (6) for
about 3 seconds until the 2 indicators,
hot water (7) and steam (9) come on.
18) Release the coffee supply key (6): the
machine stores the new temperature
setting and is again ready to make cof-
fee.