Specifications - Olympus PT-042 Manual De Instrucciones

Q12: What are the model names of the accessories for the PT-042?
A12: The following accessories are being sold.
1 O-ring for the PT-042 body (POL-042): This is a silicone rubber
O-ring packing to be installed in the PT-042 body to make it
En
waterproof. O-rings for other Case models cannot be used.
2 Silicone grease (PSOLG-1/2/3): This is a grease for silicone O-
ring maintenance.
3 Silica gel (SILCA-5S): This is a desiccant used to prevent
fogging of the glass parts of the Case. The quantity is five bags.
4 LCD hood (PFUD-07): This hood is installed on the LCD
monitor window of the Case to facilitate the viewing of the LCD
monitor of the camera.
* Please contact your dealer or a service station of our
company when replacement is required. Replacement will
be made against payment.
* The PT-042 is not provided with a balance weight.

Specifications

Compatible models
Pressure resistance
Main materials
Diameter of lens ring
Dimensions
Weight
* We reserve the right to change the external appearance and the
specifications without notice.
EN 38
Olympus digital camera
µ 1020/Stylus 1020/µ 1010/Stylus 1010
Depth of up to 40 m
Body: Transparent polycarbonate
Buckles: Stainless steel
Grip/Shutter lever/Operation buttons:
Polycarbonate
Lens window: FL glass
Operation button shafts: Stainless steel
∅62 mm
Width 138 mm x height 100 mm x thickness
104 mm (projections not included)
455 g (camera and accessories not included)