Installation - Tripp-Lite B118-002-UHD El Manual Del Propietario

Installation

Notes:
• The maximum distances referenced in these instructions have been
tested at a UHD 4K x 2K video resolution of 3840 x 2160 @ 24 Hz and
30 Hz with 36-bit (12 bits per channel) Deep Color using 28 AWG (0.08
mm
2
monitors are achievable using 24 AWG (0.2 mm
• When connecting monitors that support different maximum resolutions, the
video resolution displayed will be limited to the lowest maximum resolution.
For example, if connecting a combination of 1080p and 4K x 2K monitors,
a 1080p video resolution will be displayed on all screens.
1 Make sure the power to all devices you will be connecting is
turned off.
2 Connect the HDMI source to the Input port on the splitter.
Note: The length of the HDMI cable connecting the source to the splitter
must not exceed 16.4 ft. (5 m).
18-04-038-9336A7.indb 4
) HDMI cables. Longer distances between the splitter and connected
Source
B118-008-UHD
2
4
) HDMI cables.
5/11/2018 8:23:28 AM