Installation - Tripp-Lite B118-002-UHD Manual Del Usuario

Installation

Notes:
• The maximum distances referenced in these instructions have been tested at a
UHD 4K x 2K video resolution of 3840 x 2160 @ 24 Hz and 30 Hz with 36-bit
(12 bits per channel) Deep Color using 28 AWG (0.08 mm
Longer distances between the splitter and connected monitors are achievable
using 24 AWG (0.2 mm
• When connecting monitors that support different maximum resolutions, the
video resolution displayed will be limited to the lowest maximum resolution. For
example, if connecting a combination of 1080p and 4K x 2K monitors, a 1080p
video resolution will be displayed on all screens.
1
Make sure the power to all devices you will be connecting is turned off.
2
Connect the HDMI source to the Input port on the splitter.
Note: The length of the HDMI cable connecting the source to the splitter must
not exceed 16.4 ft. (5 m).
20-09-261-9336A7-Book.indb 4 20-09-261-9336A7-Book.indb 4
Source
B118-008-UHD
) HDMI cables.
2
4
) HDMI cables.
2
7/22/2021 11:32:57 AM 7/22/2021 11:32:57 AM