Troubleshooting Checklist - Waeco PocketPower TSI102 Instrucciones De Uso

PocketPower TSI102
If you need to scrap the device, ask your local recycling centre or specialist
dealer for details about how to do this in accordance with the applicable disposal
regulations.
11

Troubleshooting checklist

Feature
The device does not switch on
after connection to the 12 V
socket (the blue LED
(fig. 1 1, page 3) does not
light up.
The device switches on and
off repeatedly.
The inverter switches off when
the consumer is switched on.
Possible cause
The cigarette lighter is
switched on via the ignition.
The battery voltage is less
than 10 V.
The device has overheated.
The fuse (in the the vehicle) is
defective.
The constant load is too high
(the consumer unit has a
power consumption of more
than 120 W).
The starting current of the
consumer is too high.
Troubleshooting checklist
Remedy
Switch the vehicle ignition on.
Charge the vehicle battery (start
the engine).
Switch off the consumer unit, allow
the inverter to cool down and
ensure better ventilation.
Have an electrician replace the
fuse.
Reduce the constant load.
Compare the device power with the
maximum power of the inverter.
17