Other Set; Factory Defaults - Samsung SCC-B2331 Manual Del Usuario

How to use OSD Menu
PRIVACY ZONE SET1
PIXEL LEVEL
<POINT>
<POSITION>
- How to set the point
You can set each position of the 4 points.
① If you press the SETUP switch in <POINT>,
you will see the points available in the
PRIVACY ZONE. Each time you press the
SETUP switch, the points available will move.
② Use the
of each point. Set each position of the four
points and press the SETUP switch to
complete the positioning.
- How to set the position
You can move the position of the overall area.
① By pressing the SETUP switch in
<POSITION>, you can move the overall
position of the privacy zone.
② Use the
position and press the SETUP switch to
confi rm it.

Note :
If more than one PRIVACY ZONE is specifi ed and the
–
PRIVACY SET is set to ON, the PIP function will be
deactivated.
If the 12th PRIVACY ZONE is specifi ed, the LINE function
–
of FENCE will be deactivated.
24 – DIGITAL COLOR CAMERA
[4]
switch to set the position
switch to move the

OTHER SET

OTHER SET

FACTORY DEFAULTS

OSD COLOR
❖
FACTORY DEFAULTS
All the settings will be restored to the factory
default.
However, the settings of LANGUAGE will not be
restored to the default.
❖
OSD COLOR
You can set the OSD(On-screen Display) color to
COLOR or B/W.
BW
[BW, R/G/B]