Sage the Smart Grill Guía Rápida página 15

NOTE
The underside of the cooking plate may
discolour over time and can form a layer of
corrosion. This is normal. Any discolouration
that may occur to either side of the cooking
plate will only detract from the appearance
of the plate and will not affect the cooking
performance.
To remove discoloration or corrosion, use a
non-abrasive plastic scouring pod or nylon
washing brush. Rinse and dry thoroughly.
NOTE
Ensure the round pad on the underside of the
plate is clean.
5. Rinse and dry thoroughly. Always
ensure the cooking plates are correctly
re-inserted and securely locked back
into position after cleaning and prior to
inserting the power plug into a wall outlet.
NOTE
Do not use abrasive cleaners or metal pads
to clean the cooking surface of the plates.
These will damage the non-stick coating on
the cooking plates.
STORAGE
1. Ensure the grill is turned OFF by turning
the Temperature dial to the OFF position.
The grill is OFF when the LCD screen
displays OFF and the default '0' zero time.
Remove the power plug from the wall
outlet.
2. Allow the grill, cooking plates and drip tray
to cool completely,
3. Ensure the grill cooking plates and drip
tray are clean and dry.
4. Ensure the drip tray is correctly re-inserted
into the grill.
5. Ensure the cooking plates are correctly re-
inserted and securely locked into position.
6. Ensure the cooking plates are locked
together by sliding the adjustable height
control away from you, into the LOCK
position.
7. Wrap the power cord in the cord storage
located on the underside of grill.
8. Store on a flat, dry, level surface.
Alternately, the grill may be stored in an
upright position.
EN
15