Philips HQ686/02 Manual De Instrucciones página 11

B
C
2
1
C
Do not clean more than one cutter and guard at
a time, since they are all matching sets. If you
accidentally mix up the cutters and guards, it may
take several weeks before optimal shaving
performance is restored.
B
Damaged or worn shaving heads (cutters and
guards) may only be replaced with original HQ6
Philishave Quadra shaving heads.
Cause 2: long hairs are obstructing the shaving
heads.
Remove the retaining frame from the shaving
unit by turning the wheel anticlockwise.
Remove the shaving heads from the shaving
unit.
Remove the hairs from the cutters and guards
with the brush supplied.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit, press the wheel and turn it
clockwise.
Cause 3: the shaving heads are damaged or worn.
Remove the retaining frame.
Remove the old shaving heads from the
shaving unit and replace them with new ones
ENGLISH
13