Philips HQ6868/16 Manual De Instrucciones página 7

C
4
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
performance. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
C
5
Brush carefully in the direction of the arrow.
C
6
C
7
1
2
8
For extra thorough cleaning, clean the shaving
heads by putting them in a degreasing liquid (e.g.
alcohol) every six months.To remove the shaving
heads, follow steps 1 to 4 described above. After
cleaning, lubricate the central point on the inside
of the guards with a drop of sewing machine oil
to prevent wear of the shaving heads.
Remove and clean the shaving heads
(cutters and guards) one by one.
Clean the cutter with the short-bristled
side of the brush.
Brush the guard.
Put the shaving heads back into the shaving
unit. Put the retaining frame back into the
shaving unit (1) and turn the wheel
clockwise (2).
Put the shaving unit back onto the shaver.
ENGLISH
9