of passing the last card.
03. To terminate the procedure, pass MASTER-2 once in front of the reader or wait
more than 10 seconds after passing the last card.
Additional cards can be memorised at any time by repeating this procedure from the
beginning.
7.5
Professional
Program (with the SINGLE MASTER) the cards that en-
able command no. 1
01. Pass the SINGLE MASTER in front of the reader once.
02. Pass the new card in front of the reader once. Note – After the first card, other
cards can be programmed by repeating point 02 for each one within 10 seconds
of passing the last card.
03. To terminate the procedure, pass the SINGLE MASTER once in front of the
reader or wait more than 10 seconds after passing the last card.
Additional cards can be memorised at any time by repeating this procedure from the
beginning.
7.6
Professional
Program (with the SINGLE MASTER) the cards that en-
able command no. 2
01. Pass the SINGLE MASTER in front of the reader once.
02. Pass the new card in front of the reader twice. Note – After the first card, other
cards can be programmed by repeating point 02 for each one within 10 seconds
of passing the last card.
03. To terminate the procedure, pass the SINGLE MASTER once in front of the
reader or wait more than 10 seconds after passing the last card.
Additional cards can be memorised at any time by repeating this procedure from the
beginning.
6 – English
7.7
Professional
Program (with the SINGLE MASTER) the cards that en-
able commands no. 1 and no. 2
01. Pass the SINGLE MASTER in front of the reader once.
02. Pass the new card in front of the reader three times. Note – After the first card,
other cards can be programmed by repeating point 02 for each one within 10
seconds of passing the last card.
03. To terminate the procedure, pass the SINGLE MASTER once in front of the
reader or wait more than 10 seconds after passing the last card.
Additional cards can be memorised at any time by repeating this procedure from the
beginning.
7.8
Professional
Erase (using a MASTER...) one or more memorised
cards
01. Pass the MASTER (*) in front of the reader twice.
02. Pass the card to be erased in front of the reader once. Note – After the first
card, other cards can be erased by repeating point 02 for each one within 10
seconds of passing the last card.
03. To terminate the procedure, pass the MASTER (the same one used in step 01)
once in front of the reader or wait more than 10 seconds after passing the last card.
(*) – Use MASTER-1, MASTER-2 or the SINGLE MASTER, according to the group to
which the card belongs.
Additional cards can be erased at any time by repeating this procedure from the
beginning.