Maintenance Of The Product; Technical Features - Nice ETPB Instrucciones Y Advertencias De Instalación Y Uso

12 - MAINTENANCE OF THE PRODUCT

The product does not require special maintenance operations. It is recommended to
clean external surfaces using a soft damp cloth. Do not use aggressive or abrasive
substances such as detergents or solvents.
13 - SCRAPPING THE PRODUCT
This product constitutes an integral part of the automation system, therefore it must
be disposed of along with it. • As when installing the product, when the product
reaches the end of its service life, it must be scrapped by a qualified technician. • This
product is made up of different types of material, some of which can be recycled while
others must be disposed of. Seek information on the recycling and disposal systems
envisaged by the local regulations in your area for this product category. Caution! –
some parts of the product may contain pollutant or hazardous substances which, if
disposed of into the environment, may cause serious damage to the environment or
physical health. • As indicated by this symbol, the product may not be
disposed of as domestic waste. Separate the waste into categories for
disposal, according to the methods envisaged by current legislation in
your area, or return the product to the retailer when purchasing a new ver-
sion. Caution! – Local legislation may envisage serious fines in the event of abusive
disposal of this product. • Packaging materials must be disposed off in accordance
with local regulations.
12 – English

TECHNICAL FEATURES

WARNINGS: • All technical specifications stated in this section refer to an ambient
temperature of 20°C (± 5°C). • Nice S.p.a. reserves the right to modify its products
at any time deemed necessary, while maintaining the same intended use and func-
tionality.
● Type: access control system by card (use models available in Nice product cata-
logue), passive transponder, 125 kHz, 32 bit read only.
● Technology used: "BlueBus".
● Lighting: Red LED, front of reader.
● Length of connection cable: see instructions manual of control unit for connec-
tions from a "BlueBus" device to the control unit.
● Power: the reader is operated from the control unit via the "Bluebus" system.
● Absorbed current: 2 "BlueBus" units.
● Read distance: with card in front of reader, maximum distance of 4 cm.
● Memory capacity: 1 BM1000 card contains up to a maximum of 255 codes
(cards). Other cards with different memory capacities can be installed.
● Insulation: class III
● Housing protection rating: IP 54
● Operating temperature: -20 °C to +55 °C
● Use in acid, saline or potentially explosive atmosphere: No
● Installation: vertical wall.
● Dimensions (mm): 70 x 70 x h 26
● Weight: 265 g